Home General Error Code 0xc000000e: Fixed

Error Code 0xc000000e: Fixed


Has it ever happened that you are restarting your computer and you come across an 0xc000000e error code, hindering you from accessing and continuing work on PC? Well, if that has happened to you in the past and you outsourced an expert’s help everytime to resolve that problem, you may have landed at the right place. We have a few solutions that you should try the next time you face this issue. Before we dig into the solutions, let’s understand the meaning and cause of 0xc000000e. 

What is Error Code 0xc000000e?

The 0xc000000e error is a common boot issue in Windows OS that appears when the Boot Configuration Data (BCD) is damaged or missing. This error code prevents the operating system from properly loading, resulting in a black screen or the inability to boot Windows.

The error code might reflect the following message on the screen:

  • ‘The boot selection failed because a required device is inaccessible.’ 
  • ‘Your PC needs to be repaired.’ 

The reason could be anything from an issue with the hard disk to system file corruption or BCD errors. Every problem has a solution. However, before we get to the solutions, let’s browse through the various reasons causing this issue.

Reasons for Error Code 0xc000000e in Windows 11 or earlier versions

Prior to looking at the fixes, it’s critical to comprehend the causes of error code 0xc000000e. The most typical reasons consist of:

  1. Missing or corrupted boot configuration data (BCD) file
  2. Faulty boot configuration parameters
  3. Improperly set up system partition
  4. Problems with the hardware or software

How to Fix Windows 10 error code 0xc000000e?

After determining the probable reasons, let’s investigate the fixes for error code 0xc000000e:

  1. Use Automatic Repair
  • Insert your ‘Windows installation media’ (USB/DVD) and boot your computer
  • After choosing your preferred language, select ‘Repair your computer’
  • Go to ‘Advanced options’ > ‘Troubleshoot’ > ‘Startup Repair’
  • To finish the automated repair procedure, adhere to the on-screen directions

Restart your computer to see if the issue has resolved. If it still persists, follow the next method.

  1. Rebuild BCD

Using this approach, you may resolve Windows error code 0xc000000e by reconstructing the BCD store, which holds boot process information.

  • Use the Windows installation media to boot your machine
  • After making your language selection, click ‘Next’
  • Select ‘Repair your computer’
  • Choose ‘Troubleshoot’ > ‘Advanced’ > ‘Command Prompt’
  • Enter ‘boutre /rebuildbcd’ in the command prompt.
  • Press ‘Y’ to rebuild the BCD if the Windows installation is located
  • After that, type the command ‘boutre /fixmbr’ and hit ‘Enter’
  • Incorporate the command ‘boutre /fixboot’ and hit ‘Enter’ again

Once the process is finished, restart your computer to check if 0xc000000e fix/fixes without CD in Windows 10, and see whether the issue has resolved.

  1. Reset the BIOS Settings

Resetting BIOS settings might resolve the error code 0xc000000e using the following steps:

  • Open your computer.
  • Press the key to enter the BIOS/UEFI when the machine boots up (usually when the manufacturer’s logo appears). While it can change, this key is often F2, F12, Del, or Esc.
  • If you are having problems entering the BIOS/UEFI, see your computer’s handbook or the manufacturer’s website for detailed instructions
  • Look through the UEFI/BIOS settings and browse between menus using the arrow keys
  • Find the option to reset to default. It is often labeled as ‘Load Default Options,’ ‘Load Optimal Defaults,’ ‘Load Setup Defaults,’ or anything similar. You may usually find the reset to default option under the ‘Exit’ menu or a similar section. Choose Reset to Default Settings when you’ve located it.
  • If prompted, verify the action. By doing this, all BIOS and UEFI settings will be restored to as they were when the PC was first released by the manufacturer.
  • After resetting, verify the boot order. Go to the Boot menu.
  • Make sure your primary hard disk is configured as the first boot device. This step is critical for the system to locate and start the OS successfully.
  • To preserve your settings, make any required modifications to the boot order and then exit
  • Go to the ‘Exit’ menu and choose ‘Save and Exit’ or the corresponding option in your BIOS/UEFI
  • Restart your computer

The BIOS/UEFI default settings will be applied when the system restarts. Check to see whether the error code 0xc000000e has been fixed.

  1. Recheck Physical Device Connections

Initially, you want to see if your computer is connected to any other devices. If BIOS or UEFI setup is set up in a way so that any external device connected has a greater boot priority than the hard drive, your machine might attempt to boot into the externally connected disk. Pen drives, CDs, DVDs, USB storage devices, and more are common examples of external devices.

To see whether there are any problems with physical devices, take the actions listed below:

  • Check for any disconnected or loose cables to make sure the hard drive or SSD connections are secure.
  • After disconnecting any external hard drives or USB storage devices, restart the computer. These devices could, at times, obstruct the boot process.
  • Examine the cables and connections for indications of wear or damage.
  1. Repair damaged System Files with SFC

Windows 10 error code 0xc000000e may be fixed by repairing damaged system files with SFC, which can identify and correct any damaged system files that might be the source of the issue. This is a CD-free repair for Windows 10 error 0xc000000e.

  • Start your PC using the Windows installation disc
  • Click ‘Next’ after making your language selection
  • Select ‘Repair your computer’
  • Select ‘Troubleshoot’ from the menu, then ‘Advanced’ and finally ‘Command Prompt’
  • Enter the following instruction and hit ‘Enter: sfc /scannow /offbootdir=c:\ /offwindir=c:\Windows’
  • Hold off until the system file checker has finished scanning.
  • Enter the following command, ‘chkdsk c: /r,’ and hit ‘Enter’
  • Await the disk check to finish the scan
  • Try restarting your computer to see whether the issue has been fixed
  1. Register Boot Disk Online

Occasionally, because the system cannot boot from that drive, our activities might unintentionally cause the boot disk to become offline. If you believe that this might be the issue, there are a few simple measures you can take to resolve it.

  • After inserting the Windows installation disk, select ‘Next’
  • Choose ‘Repair your computer’ to access ‘WinRE’
  • Select ‘Troubleshoot’ and then select ‘Advanced’ from the menu to launch ‘Command Prompt’
  • Select the user account and provide the relevant password
  • After typing ‘diskpart,’ hit ‘Enter’
  • Type list disk to display all disk partitions, and type list volume to view the capacity of each partition. Input ‘Enter.’
  • To pick the operating system partition, type select disk* or select volume*, then hit ‘Enter’
  • For the disk to return to online, type online disk or online volume and hit ‘Enter’
  • Type exit to close ‘DISKPART’
  • Finally, close the command prompt

Restarting the computer will enable a successful boot. Please try all the preceding ways before using this one, as even a small misspelling might result in significant data loss.

  1. Check Disk for Errors
  • Using the Windows installation media, navigate to the ‘Command Prompt’
  • Type the following command: chkdsk /f /r C: If your system drive’s letter is different, replace ‘C:’ with it.
  • Give the system permission to detect and fix disk faults.
  1. Rebuild BCR Registry Hive

Data pertaining to boot settings is stored in the Boot Settings Registry (BCR), an essential part of the Windows operating system. Your computer may not boot up properly if the BCR Registry Hive becomes destroyed or corrupted. By returning the registry to its initial configuration, rebuilding the BCR Registry Hive can assist in resolving these problems. Follow these steps to rebuild the BCR Registry Hive:

  • Boot your PC from Windows installation media (USB or DVD)
  • On the Windows Setup screen, pick your language settings and then click ‘Next’
  • In the bottom-left corner of the screen, select ‘Repair your computer’
  • Select the operating system you wish to fix and then click ‘Next’
  • On the following screen, click ‘Troubleshoot’
  • Select ‘Advanced Options’ and then ‘Command Prompt’
  • Enter the following commands in the Command Prompt, clicking ‘Enter’ after each: 
  • ‘bootrec /FixMbr’ 
  • ‘bootrec /FixBoot’ 
  • ‘bootrec /ScanOs’ 
  • ‘bootrec /RebuildBcd’
  • Close this window, take the disk out of the computer, and restart it normally
  1. Check WHQL Support Settings in BIOS

The Windows 8.1/10 BIOS’s WHQL support setting has two primary functions: it lets you enable UEFI support and looks for drivers that have been signed when the system is booting. You must enable this WHQL support setting if it isn’t already enabled on your PC. This will guarantee that your computer boots up without a hitch, as the error code 0xc000000e may be the result of a deactivated WHQL support setting. Check it by going to the BIOS settings, as mentioned below.

  • Access the BIOS configuration
  • To access the WHQL option, navigate to the Boot or Security tab
  • Make sure it is enabled to facilitate Windows booting correctly
  1. Reset BIOS/UEFI Configuration
  • Reboot your computer
  • Access the BIOS settings by pressing the prompt key. Although the hotkeys for this function can vary, the most commonly used ones are F2, F12, Esc, Del, etc.
  • Use the arrow keys on your keyboard to navigate the screen and locate the BIOS setup’s default option. 
  • Once you have located this option, click on it and hit the ‘Enter’ key to start the BIOS configuration or reset
  • Press ‘F10’ to save the modifications and close the BIOS settings window
  • The computer will restart itself
  1. Install Windows 10 from scratch

Installing a fresh copy of Windows is one way to fix Windows 10 error code 0xc000000e.

  • Start your PC with the Windows installation media
  • Choose your language preference. If prompted, enter your product key. Accept the terms of the license.
  • Click on ‘Custom Installation’ 
  • Make a new partition and erase all the existing ones on your hard disk
  • Set up Windows 10 on the newly created partition
  • Restart your computer to see if the issue has been fixed

There may be a risk of data loss if none of the solutions work to fix the error code 0xc000000e. This is especially likely to occur if a highly corrupted system file or a failing hard disk is the cause of the error.

Under such circumstances, there is a chance that the operating system will become unusable and crucial data may be lost.

It is suggested to back up your data from the afflicted drive using a data recovery program such as Stellar Data Recovery Software for Windows before attempting steps like OS reinstallation. By assisting with file recovery from unbootable systems, this program reduces the possibility of data loss.

A few features of Stellar Data Recovery Professional are: 

  • Recover lost or erased data from a variety of devices, such as memory cards, SD cards, external hard drives, laptops, PCs, and USB drives.
  • Recover more than 300 file types using an easy-to-use recovery procedure.
  • Allows for the recovery of crashed or unbootable systems as well as formatted partitions.
  • Provides a 100% preview of recovered files before saving. 
  • Suitable with Windows 10, 7, and 11.
  • Offers configurable searches, a large file-type library, and deep scan capabilities for advanced recovery.


To summarize, error code 0xc000000e can be a bothersome issue that prevents your Windows system from booting properly. However, the blog includes a complete guide with many troubleshooting options for resolving the situation. To avoid any data loss, carefully follow the procedures and backup your data.