Rigging is precisely securing loads with the use of a combination of different rigging equipment. Thus, rigging equipment is an umbrella term that covers a wide range of tools and accessories that were made specifically for rigging. The use of rigging isn’t limited at all, and for this reason, an extensive number of rigging accessories are made to be used for specific kinds of rigging tasks. Therefore, it is very important to understand every rigging accessory to know where it goes. Like one can’t simply use any chain for every type of rigging task, some chains are made to withstand the impact of heavy loads and would work perfectly fine, whereas others are made to only bear very low impact loads, and if one would use them with heavy loads then it would result in a severe accident. With that being said, we have tried placing all the commonly used rigging equipment in this article to familiarize you with them so that your rigging game can get stronger.
The most common and extremely essential rigging equipment is chains or ropes; without these, rigging isn’t possible. These act as the main pillars and hold the load at its place, whereas other rigging equipment go along with these and facilitate in rigging altogether. Chains and ropes can be found in a variety of sizes; there sure would be a chain or rope suited for your load.
Hooks go along with ropes and chains; ropes and chains aren’t directly connected to the load, but instead, hooks connect ropes and chains with the load that is being lifted or transported from one place to another. However, unlike chains and ropes, hooks are distinctively different from one another.
Clevis Grab Hook:
This hook has a clevis pin that is connected to the bracket or chain in a rigging setup, it looks like alphabet U and has a pin or bolt at its end, but the hook is open. Almost any clevis grab hooks supplier can provide you clevis hooks in different materials.
This one is also an open hook but has an eye at its end instead of a pin or bolt.
This hook is also an open hook and is very flexible to use as it offers 360-degree rotation.
This hook is good for minimal loads only as it has no lock or anything, and both the ends are open, and thus the shape of this hook is like alphabet S.
Shackles are used to connect links in a rigging setup like they can connect slings, ropes, chains, or any other lifting accessory. There are different types of shackles too.
This is an O-shaped shackle with a pin through cross holes and is extremely good for heavy loads.
This shackle is different from the bow shackle in the sense that it is D-shaped; otherwise, it also has pin or bolt through cross holes and is good for rigging heavy loads.